Hybrid Pocket Tool for Mini RG59, RG59 and RG6 Fixed Pin Connectors


  • Use the appropriate ¼ x ¼ cable strip tool for the cable being terminated.
  • Push the connector onto the cable by utilizing the appropriate integrated insertion port located on the front of your HPT tool.
  • Release the latch on the tool lever, allowing the lever to swing open so that you are able insert the connector and cable.
  • Insert the connector into the plunger tip and push the cable down through the 360 degree connector support dogs.
  • Start to close the handles of the tool together.
  • As the handles close, the plunger slides toward the dogs.
  • When the handles are fully closed together, the connector has been terminated.
  • Open handles to remove the connector.
  • Back the connector away from the plunger slot and grasping the cable behind the connector, lift the assembly out of the tool.

NOTE: The compression throw distance is set at the factory. A hex lock nut keeps the tool calibrated over long periods of use. Field calibration, if necessary, is quick and easy. We advise periodic use of 3 in 1 oil on the plunger only.

Ordering Information

Part NumberDescription
HPT6590WSHybrid Pocket Tool for Mini RG59, RG59 and RG6 Fixed Pin Connectors