ATX XDS-PRO1R Digital Audio ReceiverThe XDS-Pro1R digital audio receiver allows radio stations to receive audio broadcast from distributed satellite or IP networks for live broadcasting or storage for later play-out.  The unit provides targeted advertising capabilities, allowing radio networks to play localized ads & other content relevant to specific locations.

ATX XDS-PRO1R Digital Audio Receiver Features

  • Low bitrate down to 100 Ksps (optional), 256 Ksps standard
  • Can fit in a 150 kHz carrier (optional), 400 kHz standard
  • DVB S/S2 – QPSK/8PSK
  • MPEG-2, AAC-LC,HEv1,and HEv2 *
  • One balanced analog output
  • One digital AES/EBU output
  • One IP AES67 output (one stream)
  • 128 GB M2SATA solid-state drive
  • Store and forward file delivery
  • Receives live IP streams
  • Locally input LIDs, liners and spots
  • Import/export content locally
  • Store and forward
  • Audio input for network automation
  • One PAD output port for RDS
  • 16 relay closures (hard, RS-232, and IP)
  • Program station automation via WebUI
  • Two 100BaseT Ethernet ports with VLAN
  • DHCP, NFS, HTTP and Telnet
  • Alarms via relay closure, email and SNMP
  • In-field firmware upgradable
  • Record and insertion of media
  • Remote control via Xpress or XDSv7
  • For satellite or streaming networks
  • Cost-effective
In addition, to copy splitting, the cost-effective XDS-Pro1R supports audio insertion & digital live recording with playback to delay time zone feeds.  It also has advanced station automation interfaces via IP, RS-232, relay closures, OPTOs & commands to seamlessly interface with automation systems.  Finally it advanced scheduling capabilities allow networks & stations to automatically switch between live & pre-recorded channels & programs

ATX XDS-PRO1R Digital Audio Receiver Specifications

  • Audio Decoders: MPEG-1 Layer II & AAC LC Status Alarm Out
  • Audio Input: 1 Balanced DB9-F, 1 AES/EBU D89-F
  • Audio Output: 1 Balanced OUtpout DB9-M, 1 Digitial DB9-AES/EBU, 1 Digital IP-AES 67
  • Carrier Level: -20 dBm to -60 dBm
  • Connector: F-type Female
  • Dimensions: 3.5" x 19" x 12"
  • Frequency Range: 950-2150 MHz
  • Impedance: 75
  • INB DC Power: +18 VDC @ 500mA
  • Input Voltage: 90 VAC to 240 VAC
  • LAN: 10/ 100BaseT RJ45
  • Modulation: QPSK (DVB-S)/ 8PSK (DVB-S2)
  • Mounting: 2RU, 19" Rack Mount
  • Network Management: Via Satellite or TCP/ IP
  • OPTO Input: 4 Form-A DB9-F
  • Pad: RS@#@C DB9-F
  • Power Consumption: 150W Max.
  • Relays: 16 Form-A, NO, DB37-F
  • Web: HTTP, Telnet on 10/100BaseT RJ45