| 1 2 3 4 |
|
| About MaxCell |
| Manufacturer: MaxCell |
| MaxCell is the only flexible fabric innerduct system designed specifically for the network construction industry.
The unique fabric construction allows MaxCell to conform to the shape of cables placed within, greatly reducing the wasted space associated with rigid innerduct.
Today’s network owners and builders use MaxCell to increase their ca... |
|
|
|
|
|
| Bushing and Hole Plug Adapters |
| Manufacturer: Vikimatic |
| For use with Simplex, Triplex, and Quadplex duct plugs.
Bushings:
· Easily split in field.
· Soft expandable material.
Hole Plugs:
· Durable hard plastic.
· All products are removable and reusable.
Installation Instructions
Bushing Sleeves: Bushing sleeve is split in the field with snippers. Position bushing sleeve around cable with ... |
|
|
|
|
|
| Fiberglass and SMC Enclosures |
| Manufacturer: Newbasis |
| • Fiberglass structures with Polymer Concrete ring & covers
• Ideal for sidewalk and driveway installations, or roadway traffic ... |
|
|
|
|
|
| Fiberglass Conduit (Standard Wall) MultiCell |
| Manufacturer: Vikimatic |
| For aerial and underground installations. Available in standard or bullet-resistant.
See PDF for Accessories and Bends.
Outside Conduit Diameter: ... 4.140’’
Outside Bell Diameter: ... 4.350’’
Longitudinal Tensile Strength: ... 9000 PSI Minimum Per ASTM D2105
Assembled Weight: ... 1.75 Lbs. Per Ft.
Stiffness: ... 40 lbf (in:in) Min. Per... |
|
|
|
|
|
| High Density Plastic Enclosures |
| Manufacturer: Newbasis |
| • Built with UV-stabilized High Density Polyethylene (HDPE) or ABS
• Lightweight, durable, economical enclosures
• Ideal for irrigation, electrical, traffic signal and street lighting in non-traffic areas ... |
|
|
|
|
|
| Installation Instructions MaxCell |
| Manufacturer: MaxCell |
| When installing MaxCell, two requirements are very important:
• Swivels must always be used
• The factory installed 1250 lb pull tapes must free-float during installation.
Installation Instructions for Single-Packs
Step 1
Make a 2” incision through the MaxCell, 18” from the end. This incision should be parallel to... |
|
|
|
|
|
| MaxCell Termination Bags & Split Plugs |
| Manufacturer: MaxCell |
| For non-100% water-tight applications, MaxCell should be terminated using an easily installed, cost-effective inflatable bag system. Inflation bags wrap around the already placed MaxCell and cables, and inflate to terminate the conduit end. This system is very effective for inhibiting water, mud, debris or animal intrusion into a conduit. It can al... |
|
|
|
|
|
| MaxCell - Micro |
| Manufacturer: MaxCell |
| The MaxCell Group now offers a range of Micro MaxCell products for use in 1.0" to 2.0" ID conduits. This new product is available in 3-Cell, 2-Cell, and single cell configurations.
Features & Advantages:
• Designed for use in FTTH applications – underground as well as aerial duct applications
• Ideal for use in MDU applications where frequent... |
|
|
|
|
|
| MaxCell - Standard |
| Manufacturer: MaxCell |
| Our Standard MaxCell product is a versatile solution for the complex problems faced by today’s engineers, contractors, and network providers. Manufactured from internally designed and produced materials, this model yields superior performance over existing rigid innerduct:
• Melt point of 419°F - almost 2X of HDPE
• Resistant to ground chemicals... |
|
|
|
|
|
| MaxCell Detectable |
| Manufacturer: MaxCell |
| The MaxCell® Group is proud to offer a “Detectable” version of MaxCell. All product lines, 33mm-100mm (Single Cell, 2 Cell and 3 Cell) are available with an 18 gauge solid copper core tracer wire inserted into the products.
Features & Advantages
• Reliable method for locating cables deployed in buried conduit.
• Detectable with any industry st... |
|
|
|
|
| 1 2 3 4 |