| 1 2 3 4 5 |
|
| A-303 Pen Toner |
| Manufacturer: Lemco |
| A pocket-size continuity tester for identifying and troubleshooting drop cable lines. The LED unit, used alone, reads shorts and splitters. This unit can be used to check integrity of new reels of cable before leaving the warehouse. The LED unit and Toner unit, used at each end of a line, identify clean cable lines, assist in isolating problems o... |
|
|
|
|
|
| Combination Trap and 7/16 Tools |
| Manufacturer: Lemco |
| Lemco Trap Wrenches, like Lemco security shield tools, feature solid steel construction.
WT-20 for working with traps and f-fittings within security sleeves.
... |
|
|
|
|
|
| Extension Arm |
| Manufacturer: Lemco |
| The all steel model 1175 extension arm is zinc plated to prevent corrosion. Eight inches of vertical pole clearance are required for installation. It can be installed on all type of poles. Slots are provided for banding to cement, steel, or fiberglass poles. For mounting to wood poles, standard bolt holes are available for use of 5/8" thrubolt and ... |
|
|
|
|
|
| Gas Powered Drill |
| Manufacturer: Lemco |
| Increase strand crew production - more footage per day. This unit has been designed to offer the most lightweight engine drill on the market. The single cylinder, two cycle driving engine was especially selected because of its high power and light-weight, coupled with the most advanced technology, to guarantee years of dependable service. Reversibl... |
|
|
|
|
|
| Ground Rod Cap/ H-207 |
| Manufacturer: Lemco |
| Drive ground rods safely with the Lemco Ground Rod Cap. The 2" diameter surface provides a better target for hammer power, reducing personal injuries due to hammer deflection. Increases speed while protecting ground rods against distortion and damage to finish. Solid steel, plated. Wt. 3 lbs.... |
|
|
|
|
|
| Ground Rod Driver/ H-691 |
| Manufacturer: Lemco |
| Used to install ground rods, the heavy-wall tubular steel handle installs all but the last three feet of rods (of diameters up to ¾"). Installation is completed with the 2¼" diameter medium carbon steel square hammerhead. For additional safety we recommend using the H-207 Ground Rod Cap. ... |
|
|
|
|
|
| Ground Rod Driver/H-691 |
| Manufacturer: Lemco |
| Used to install ground rods, the heavy-wall tubular steel handle installs all but the last three feet of rods (of diameters up to 3/4”). Installation is completed with the 2-1/4” diameter medium carbon steel hammerhead. For additional safety we recommend using the H-207 Ground Rod Cap (pg 8). The tool is 42” long and is painted. Weighs 17.5 lbs.... |
|
|
|
|
|
| Jacket Stripping Tools/ PJ-Series |
| Manufacturer: Lemco |
| These tools strip the polyethylene jacket from plain or flooded cables. They can also be attached to the bushing of the X or XL Corstrip tool for one-step preparations of non-flooded cables.
... |
|
|
|
|
|
| Lemco 45 degree and 90 degree Corner Blocks |
| Manufacturer: Lemco |
| Corner Blocks are used to guide coaxial cable around corners. The MIG welded steel frames are designed on a strong 17" radius and support the rollers on 2" center. Durable aluminum rollers are compatible with synthetic winch lines. Proper alignment of the cable to the input end of the corner block will ensure minimum friction, ease of pull-out an... |
|
|
|
|
|
| Lemco Cable Caddies |
| Manufacturer: Lemco |
| The Cable Caddies shown here are for use in paying out drop cable during customer installations. Fabricated of sturdy steel tubing and painted utility orange, these devices will yield years of service.
... |
|
|
|
|
| 1 2 3 4 5 |